- Barcoding
- Printing
- Mobile Computing
- RFID
- POS Equipment
- Wireless
- Brands
- 1-800-485-3730
Navigation
Additional Information
| Manufacturer | Cisco |
|---|---|
| Model Name | Parts |
| Product Condition | New |
General Information
- Product Type: Network Module
- Brand Name: Cisco
- Manufacturer: Cisco Systems, Inc
- Product Name: IP Communications High-Density Digital Voice/Fax Network Module
Technical Information
- Application/Usage: Data Networking
Interfaces/Ports
- Interfaces/Ports: 2 x T1/E1 WAN
- Interfaces/Ports Details: 2 x T1/E1 WAN
Other
- Compatibility:
- 3845
- 3825
- 3745
- 3725
- 2691
- 2600XM Series
- 3845
- 3825
- 3745
- 3725
- 2691
- 2600XM Series
- Certifications & Standards:
- FCC Class B device
- EMC 47CFR15 Subpart B 2002, T1
- Safety IEC60950
- Telecom 47 CFR part 68, TIA/EIA 968-A
- System Requirements:
- Software and Memory Requirements:
- Cisco 2600XM:
- IP Plus images and higher
- 64 MB DRAM
- 32 MB Flash
- Cisco 2691:
- IP Plus images and higher
- 128 MB DRAM
- 32 MB Flash
- Cisco 3700:
- IP Plus images and higher
- 128 MB DRAM
- 32 MB Flash
- Supported Platforms & Minimum IOS Versions:
- 3845 - 12.3(11)T
- 3825 - 12.3(11)T
- 3745 - 12.3(7)T
- 3725 - 12.3(7)T
- 2691 - 12.3(7)T
- 2600XM Series - 12.3(7)T
- Additional Information:
- Network module contain four 80-pin SIMM sockets for PVDM2s
- Toll Bypass Support
- Telephony Interface Signaling Support
- Cisco SRST maintains basic telephony services at the branch office even if Wan goes down
- NM-HDV2-2T1/E1 with VIC2-4FXS/DID in VIC/VWIC slot. Enables FXS connectivity to analog phones/fax machines and 2 T1 digital trunk access the PSTN and WAN access.
- This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls
- Support for 4 to 120 channels with the new PVDM2 and featuring the latest digital signal processing technology
- The module is Interoperable with the full range of Cisco IP Communications solutions
- T1 Network Interface:
- Line Code: AMI, B8ZS
- AMI Ones Density: Enforced for N x 56 Kbps Channels
- Framing Format: D4 (SF) and ESF
- Output level (LBO): 0, -7.5, or -15 dB
- Input Level: +1dB0 down to -24 dB0
- DTE Interface (WIC mode): Fractional Service
- DTE Interface (VIC mode): G.704/Structured
- DCE Interface: G.704/Structured
- E1 Network Interface:
- Data Rate: 1.984 Mbps (framed mode) Per E1 Port
- Clocking: Internal and Loop (recovered from network)
- E1 National Bits: Fixed (non-configurable)
- Encoding: HDB3
- DTE Interface (WIC mode): Fractional Service
- DTE Interface (VIC mode): G.704/Structured
- DCE Interface: G.704/Structured
Management & Protocols
- Management:
- Cisco Voice Manager
- SNMP protocol compliant
- Manageable via a MIB browser
- CiscoView interface for configuration
- ConfigMaker
- NetSys supported
- Protocols:
- SNMP
- VoIP
- VoFR
- VoATM
- MGCP
- SIP
Controls/Indicators
- Status Indicators:
- AL
- LP
- CD
- EN
- PVDM 0
- PVDM 1
- PVDM 2
- PVDM 3
Environmental Conditions
- Humidity:
- 5% to 85% Non-condensing Relative Humidity Operating
- 5% to 95% Non-condensing Relative Humidity Non-operating
- Temperature:
- 32°F (0°C) to 104°F (40°C) Operating
- -13°F (-25°C) to 158°F (70°C) Storage
Media & Performance
- Data Transfer Rate:
- 1.54 Mbps T1
- 2.05 Mbps E1
I/O Expansions
- Daughter Cards: No
- Expansion Slots: 1 x VIC/VWIC
Warranty
- Limited Warranty: 90
- Industry Leader
- In business over 20 years
- Thousands of satisfied customers
- Unmatched Expertise
- Trained barcode experts
- Manufacturer certified
- Superior Service
- Same day shipping
- Easy returns
