- Barcoding
- Printing
- Mobile Computing
- RFID
- POS Equipment
- Wireless
- Brands
- 1-800-485-3730
Navigation
Additional Information
| Manufacturer | Tripp-Lite |
|---|---|
| Model Name | Parts |
General Information
- Product Type: Line-interactive UPS
- Brand Name: Tripp Lite
- Manufacturer: Tripp Lite
- Product Name: SmartPro Tower 1050SLT UPS
- Product Line: SmartPro
Technical Information
- Receptacles: 8 x NEMA 5-15R
- Plug/Connector Type: NEMA 5-15P
- Cord Length: 6 ft
Physical Characteristics
- Height: 8.8"
- Width: 6.8"
- Depth: 16.8"
- Form Factor: Tower
- Weight (Approximate): 43 lb
Interfaces/Ports
- USB: Yes
- Total Number of Expansion Slots: 1
Other
- Package Contents:
- SmartPro Tower 1050SLT UPS
- SMART1050SLT UPS System
- PowerAlert Software CD
- USB and serial cabling
- Owner's manual with warranty information
- SmartPro Tower 1050SLT UPS
- SMART1050SLT UPS System
- PowerAlert Software CD
- USB and serial cabling
- Owner's manual with warranty information
- Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications
- Additional Information:
- SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
- 1050VA / 670 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
- Large internal batteries offer runtimes of 18 minutes at half load (525VA / 335 watts) and 6 minutes at full load (1050VA / 670 watts)
- Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V
- Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface
- PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
- Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities
- Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
- Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
- Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
- 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality
- Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
- UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed
- 2 year warranty with up to $250,000 connected equipment insurance
Battery Information
- Maximum Battery Recharge Time: 4 Hour
- Backup/Run Time (Half Load): 18 Minute
- Backup/Run Time (Full Load): 6 Minute
- Battery Life: 6 Year
- Battery Chemistry: Sealed Lead Acid
- Hot Swappable: Yes
Power Description
- Load Capacity (VA): 1050 VA
- Load Capacity (Watt): 670 W
- Input Voltage: 110 V AC
- Output Voltage: 120 V AC
- Waveform Type: Sine Wave
Management
- Network Management: SNMP Manageable
- Alarm:
- On Battery
- Overload
Warranty
- Limited Warranty: 2 Year
Controls/Indicators
- Status Indicators: Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.
Environmental Conditions
- Temperature: 104°F (40°C)
- Industry Leader
- In business over 20 years
- Thousands of satisfied customers
- Unmatched Expertise
- Trained barcode experts
- Manufacturer certified
- Superior Service
- Same day shipping
- Easy returns
