Product was successfully added to your shopping cart.

Cisco AIR-AP1242AG-A-K9 Wireless Access Points
Part #: AIR-AP1242AG-A-K9 | SKU: CIS40441

The Cisco Aironet 1200 Series Access Point sets the enterprise standard for next-generation high performance secure manageable and reliable wireless local-area networks (WLANs) while also providing investment protection because of its upgrade capability and compatibility with current standards. The modular design of the Cisco Aironet 1200 supports Institute of Electrical and Electronic Engineers (IEEE) 802.11a and 802.11b technologies in both single- and dual-mode operation. You can configure the Cisco Aironet 1200 to meet customer-specific requirements at the time of purchase and then reconfigure and upgrade the product in the field as these requirements evolve. In addition the Cisco Aironet 1200 Series creates a wireless infrastructure that provides customers with maximum mobility and flexibility enabling constant connection to all network resources from virtually anywhere wireless access is deployed.

Cisco AIR-AP1242AG-A-K9 Wireless Access Points

Part Details: 1242 Access Point (802.11ag Non-Modular IOS AP RP-TNC; FCC Configuration)

Need a different version of the Cisco Aironet 1200 Series Wireless Access Points? View all 6 configurations

Additional Information

Manufacturer	Cisco
Model Name	Aironet 1200 Series

Cisco Aironet 1200 Series Specs (pdf)

Technical Information

Wireless LAN Standard:
- IEEE 802.11a/b/g
- IEEE 802.11a/b/g
ISM Band:
- Yes
- Yes
UNII Band:
- Yes
- Yes
Indoor Antenna Range:
- 460 ft
- 460 ft
Outdoor Antenna Range:
- 950 ft
- 950 ft
ISM Minimum Frequency:
- 2.41 GHz
- 2.41 GHz
UNII Minimum Frequency:
- 5.15 GHz
- 5.15 GHz
Antenna Gain:
- 2.2 dBi
- 3.5 dBi
- 2.2 dBi
- 3.5 dBi
Antenna Type:
- Diversity Dipole Antenna
- Omnidirectional Antenna
- Diversity Dipole Antenna
- Omnidirectional Antenna
Total Number of Antennas: 2
Wireless Transmission Speed:
- 54 Mbps
- 108 Mbps
ISM Maximum Frequency:
- 2.40 GHz
- 2.46 GHz
UNII Maximum Frequency:
- 5 GHz
- 5.83 GHz
Antenna Connector:
- RP-TNC Connector
- RP-TNC Connector
Wireless Security:
- UL 60950
- UL 2043
- CSA
- WPA
- WPA2
- 802.11i
- 802.1x
- TKIP
- AES
- WPA
- WPA2
- TKIP
- AES

General Information

Product Type:
- Wireless Access Point
- Wireless Access Point
Product Series:
- 1240AG
- 1240AG
Brand Name:
- Cisco
- Cisco-IMSourcing
Manufacturer:
- Cisco Systems, Inc
- Cisco-IMSourcing
Product Name:
- Aironet 1242AG Access Point
- Aironet 1242AG Wireless Access Point
Product Line:
- Aironet
- Aironet
Product Model: 1242AG

Physical Characteristics

Height:
- 1.1"
- 1.1"
Depth:
- 8.5"
- 8.5"
Form Factor:
- Desktop
- Ceiling Mountable
- Desktop
- Ceiling Mountable
Weight (Approximate):
- 2 lb
- 2 lb
Width: 6.6"

Interfaces/Ports

Fast Ethernet Port:
- Yes
- Yes
Management Port:
- Yes
- Yes
Ethernet Port: Yes
Gigabit Ethernet Port: No
10Gigabit Ethernet Port: No
PoE (RJ-45) Port: No
USB: No
HDMI: No
VGA: No
Audio Line Out: No
Serial Port: No
Network (RJ-11): No
Powerline: No

Other

Package Contents:
- Aironet 1242AG 802.11a/b/g Wireless Access Point
- Cisco Aironet 1240AG Series Power Module (universal power module)-optional
- Quick Start Guide: Cisco Aironet 1240AG Series Access Point
- Safety Warnings for Cisco Aironet 1240AG Series Access Points
- Cisco product registration and Cisco documentation feedback cards
- Mounting hardware kit:
- One mounting plate with cable security bracket
- Two suspended ceiling T-rail clips, spacers (accommodates standard and recessed T-rails), and nuts
- One security hasp
- Two 6 x 32 x 1/2 in. pan head Phillips machine screws
- Four 8 x 18 x 3/4 in. pan head Phillips sheet metal screws
- Four #8 plastic wall anchors
- One 10 x 24 nut (for ground stud on mounting bracket)
- Four rubber foot pads
- Two cable tie wraps
- Aironet 1242AG 802.11a/b/g Wireless Access Point
- Cisco Aironet 1240AG Series Power Module (universal power module)-optional
- Quick Start Guide: Cisco Aironet 1240AG Series Access Point
- Safety Warnings for Cisco Aironet 1240AG Series Access Points
- Cisco product registration and Cisco documentation feedback cards
- Mounting hardware kit:
- One mounting plate with cable security bracket
- Two suspended ceiling T-rail clips, spacers (accommodates standard and recessed T-rails), and nuts
- One security hasp
- Two 6 x 32 x 1/2 in. pan head Phillips machine screws
- Four 8 x 18 x 3/4 in. pan head Phillips sheet metal screws
- Four #8 plastic wall anchors
- One 10 x 24 nut (for ground stud on mounting bracket)
- Four rubber foot pads
- Two cable tie wraps
Certifications & Standards:
- Wi-Fi
- UL 60950
- UL 2043
- IEEE 802.11a
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.3
- IEEE 802.3af
- IEEE 802.11i
- IEEE 802.1x
- Safety:
- UL 60950-1
- CAN/CSA-C22.2 No. 60950-1
- UL 2043
- IEC 60950-1
- EN 60950-1
- NIST FIPS 140-2
- Radio Approvals:
- FCC Part 15.247
- RSS-210 (Canada)
- EN 300.328
- EN 301.893 (Europe)
- ARIB-STD 33 (Japan)
- ARIB-STD 66 (Japan)
- ARIB-STD T71 (Japan)
- AS/NZS 4268.2003 (Australia and New Zealand)
- EMI and susceptibility (Class B)
- FCC Part 15.107 and 15.109
- ICES-003 (Canada)
- VCCI (Japan)
- SRRC (China)
- EN 301.489-1 and -17 (Europe)
- EN 60601-1-2
- IEEE Standards:
- 802.11a
- 802.11b
- 802.11g
- 802.3
- 802.3af
- 802.11i
- 802.1x
Additional Information:
- Software: Cisco IOS Software Release 12.3(7)JA or later
- Memory: 32 MB RAM, 16 MB flash
- Processor: IBM PowerPC405 (200 MHz)
- Two RP-TNC connectors 802.11g or 802.11a approved
- Provides Link Role Flexibility when running Cisco IOS Software
- Can be powered by 802.3af PoE, Cisco inline power switches, single port power injectors, or local power

Management & Protocols

Management:
- Telnet
- Console port management
- Trivial File Transfer Protocol (TFTP)
- CiscoWorks Campus Manager
- CiscoWorks CiscoView
- CiscoWorks WLSE
- CiscoWorks Wireless LAN Solution Engine (WLSE)
- Simple Network Management Protocol (MIB I and MIB II)
- CiscoWorks Resource Manager Essentials (RME)
- CiscoWorks Software Image Manager (SWIM)
- Web Based Management

Warranty

Limited Warranty: 1 Year
Additional Warranty Information:
- Product does not ship from original manufacturer
- Product may not be eligible for original manufacturer warranty, rebates or programs
- Direct replacement warranty provided by Ingram Micro (1 year for components, 3 year for systems)
- Product ships from IMSourcing facility within 2-3 days or from stock
- Product may ship in non-standard packaging
- All returns processed directly from IMSourcing
- Product condition subject to availability
- Replacement parts are from our Service inventory and meet our rigorous inspection and quality standards. Some will be new, some are manufacturer certified refurbished, some are considered 'as new' and have been tested, refurbished or remanufactured. All are fully warranted
- Where applicable, -IM indicates an Ingram Micro certified pre-owned product

Power Description

Input Voltage:
- 110 V AC
- 220 V AC
- 48 V DC
Power Source:
- Power Supply
- AC Adapter
- PoE

Extended Details

Recommended Accessories for Model: Cisco AIR-AP1242AG-A-K9 Wireless Access Points

Cisco CON-SW-LAP1252A Service Contract
Part #: CON-SW-LAP1252A | SKU: CIS207999

Cisco SP Base - 1 Year - Service - 24 x 7 - Technical - Electronic

Price: $47.46

In Stock
Cisco CON-SW-AP1252AG Service Contract
Part #: CON-SW-AP1252AG | SKU: CIS207998

Cisco Base - 1 Year - Service - 24 x 7 - Technical - Electronic

Price: $47.46

In Stock
Cisco AIR-AP1200MNTGKIT= Accessory
Part #: AIR-AP1200MNTGKIT= | SKU: CIS40447

Wall Mount/Bracket Kit (for the AP1200 Series - Non-AP1242)

MSRP: $29.00 Price: $27.44
Cisco AIR-AP1242MNTGKIT= Accessory
Part #: AIR-AP1242MNTGKIT= | SKU: CIS40449

Wall Mount Kit (Ceiling) for the AP1242