Product was successfully added to your shopping cart.

Cisco AIR-LAP1242AG-A-K9 Access Point
Part #: AIR-LAP1242AG-A-K9 | SKU: CIS40545

Cisco Aironet 1240AG Series IEEE 802.11a/b/g access points deliver the versatility, high capacity, security, and enterprise-class features demanded by WLAN customers. Designed specifically for challenging RF environments like factories, warehouses, and large retail establishments it has the versatility associated with connected antennas, a rugged metal enclosure, and a broad operating temperature range. The Aironet 1240AG Series is available in: A lightweight version, an autonomous version that can be field-upgraded to lightweight operation, and a single-band 802.11g version for use in regulatory domains that do not allow 802.11a/5 GHz operation. The Cisco Aironet 1240AG Series comes complete with all the mounting hardware necessary for a secure, rugged installation. The mounting bracket locks the access point as well as the Ethernet and console cables in place to prevent theft and tampering.

Cisco AIR-LAP1242AG-A-K9 Access Point

Part Details: Cisco Aironet 1242AG Wireless Access Point - 108Mbps

Need a different version of the Cisco Aironet 1240AG Series Access Point? View all 3 configurations

Additional Information

Manufacturer	Cisco
Model Name	Aironet 1240AG Series

Cisco Aironet 1240AG Series Specs (pdf)

Technical Information

Wireless LAN Standard:
- IEEE 802.11a/b/g
- IEEE 802.11a/b/g
ISM Band:
- Yes
- Yes
UNII Band:
- Yes
- Yes
Indoor Antenna Range:
- 460 ft
- 460 ft
Outdoor Antenna Range:
- 950 ft
- 950 ft
ISM Minimum Frequency:
- 2.41 GHz
- 2.41 GHz
UNII Minimum Frequency:
- 5.15 GHz
- 5.15 GHz
Antenna Gain:
- 2.2 dBi
- 3.5 dBi
- 2.2 dBi
- 3.5 dBi
Antenna Type:
- Diversity Dipole Antenna
- Omnidirectional Antenna
- Omnidirectional Antenna
- Dipole Antenna
Total Number of Antennas: 4
Wireless Transmission Speed:
- 108 Mbps
- 54 Mbps
ISM Maximum Frequency:
- 2.40 GHz
- 2.46 GHz
UNII Maximum Frequency:
- 5 GHz
- 5.83 GHz
Antenna Connector:
- RP-TNC Connector
- RP-TNC Connector
Wireless Security:
- WPA
- WPA2 (802.11i)
- Cisco message integrity check (MIC)
- IEEE 802.11 WEP keys of 40 bits and 128 bits
- EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
- Protected EAP-Generic Token Card (PEAP-GTC)
- PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)
- EAP-Transport Layer Security (EAP-TLS)
- EAP-Tunneled TLS (EAP-TTLS)
- EAP-Subscriber Identity Module (EAP-SIM)
- AES-CCMP encryption (WPA2)
- TKIP (WPA)
- WPA TKIP
- IEEE 802.11 WEP keys of 40 bits and 128 bits
- 40/128-bit WEP
- WPA
- WPA2
- TKIP
- EAP-FAST
- PEAP-GTC
- PEAP-MSCHAP
- EAP-TLS
- EAP-TTLS
- EAP-SIM
- LEAP
- AES-CCMP

General Information

Product Type:
- Wireless Access Point
- Wireless Access Point
Product Series:
- 1240AG
- 1240AG
Brand Name:
- Cisco
- Cisco-IMSourcing
Manufacturer:
- Cisco Systems, Inc
- Cisco-IMSourcing
Product Name:
- Aironet 1242AG Wireless Access Point
- Aironet 1242AG Wireless Access Point
Product Line:
- Aironet
- Aironet
Product Model: 1242AG

Physical Characteristics

Height:
- 1.1"
- 1.1"
Depth:
- 8.5"
- 8.5"
Form Factor:
- Wall Mountable
- Ceiling Mountable
Weight (Approximate):
- 2 lb
- 2 lb
Width: 6.6"

Interfaces/Ports

Fast Ethernet Port:
- Yes
- Yes
Number of Network (RJ-45) Ports: 1
Ethernet Port: Yes
Gigabit Ethernet Port: No
10Gigabit Ethernet Port: No
PoE (RJ-45) Port: No
HDMI: No
VGA: No
Audio Line Out: No
Network (RJ-11): No
Powerline: No

Other

Package Contents:
- Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access Point
- Mounting hardware kit
- Quick Start Guide: Cisco Aironet 1240AG Series Access Point
- Safety Warnings for Cisco Aironet 1240AG Series Access Points
- Cisco product registration and Cisco documentation feedback cards
- Mounting plate:
- Cable security bracket
- 2 x suspended ceiling T-rail clips (accommodates standard and recessed T-rails)
- 1 x security hasp
- 4 x (6 x 32 x ½ inches) pan head Phillips machine screws
- 1 x (8 x 18 x ¾ inches) pan head Phillips sheet metal screws
- 2 x No. 8 plastic wall anchors
- 1 x (10 x 24) nut (for ground stud on mounting bracket)
- 4 x rubber foot pads
- 2 x cable tie wraps
- Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access Point
- Mounting hardware kit
- Quick Start Guide: Cisco Aironet 1240AG Series Access Point
- Safety Warnings for Cisco Aironet 1240AG Series Access Points
- Cisco product registration and Cisco documentation feedback cards
- Mounting plate:
- Cable security bracket
- 2 x suspended ceiling T-rail clips (accommodates standard and recessed T-rails)
- 1 x security hasp
- 4 x (6 x 32 x ½ inches) pan head Phillips machine screws
- 1 x (8 x 18 x ¾ inches) pan head Phillips sheet metal screws
- 2 x No. 8 plastic wall anchors
- 1 x (10 x 24) nut (for ground stud on mounting bracket)
- 4 x rubber foot pads
- 2 x cable tie wraps
Certifications & Standards:
- Wi-fi
- UL 60950-1
- CAN/CSA-C22.2 No. 60950-1
- UL 2043
- IEC 60950-1
- EN 60950-1
- NIST FIPS
- Radio approvals:
- FCC Part 15.247, 15.407
- RSS-210 (Canada)
- EMI and susceptibility (Class B)
- ICES-003 (Canada)
- Security:
- IEEE 802.11i, WPA2, WPA
- IEEE 802.1X
- AES, TKIP
- Other:
- IEEE 802.11a
- IEEE 802.11b
- IEEE 802.11g
- FCC
- RSS-102
- FCC Bulletin OET-65C
- RSS-102
- EN 50155 and EN 50121-3-2 (Railway)
- IEEE Standards:
- 802.11a
- 802.11b
- 802.11g
- Safety:
- UL 60950-1
- CAN/CSA-C22.2 No. 60950-1
- UL 2043
- IEC 60950-1
- EN 60950-1
- NIST FIPS 140-2 level 2 validation
- Radio Approvals:
- FCC Part 15.247, 15.407
- RSS-210 (Canada)
- EN 300.328, EN 301.893 (Europe)
- ARIB-STD 33 (Japan)
- ARIB-STD 66 (Japan)
- ARIB-STD T71 (Japan)
- AS/NZS 4268.2003 (Australia and New Zealand)
- EMI and susceptibility (Class B)
- FCC Part 15.107 and 15.109
- ICES-003 (Canada)
- VCCI (Japan)
- EN 301.489-1 and -17 (Europe)
- EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
Additional Information:
- Antenna Connectors:
- 2.4 GHz: Dual RP-TNC connectors
- 5 GHz: Dual RP-TNC connectors
System Requirements:
- Web Browsers:
- Internet Explorer 6 or later
- Netscape Navigator 7.0 or later

Warranty

Limited Warranty: 1 Year
Additional Warranty Information:
- Product does not ship from original manufacturer
- Product may not be eligible for original manufacturer warranty, rebates or programs
- Direct replacement warranty provided by Ingram Micro (1 year for components, 3 year for systems)
- Product ships from IMSourcing facility within 2-3 days or from stock
- Product may ship in non-standard packaging
- All returns processed directly from IMSourcing
- Product condition subject to availability
- Replacement parts are from our Service inventory and meet our rigorous inspection and quality standards. Some will be new, some are manufacturer certified refurbished, some are considered 'as new' and have been tested, refurbished or remanufactured. All are fully warranted
- Where applicable, -IM indicates an Ingram Micro certified pre-owned product

Power Description

Input Voltage:
- 110 V AC
- 220 V AC
Power Source:
- Power Supply
- Power Supply
- PoE

Management & Protocols

Management:
- Command Line Interface (CLI)
- Web-based Management
- Cisco WCS
- CiscoWorks WLSE

Extended Details

Cisco AIR-LAP1242AG-A-K9 Access Point Part #: AIR-LAP1242AG-A-K9 | SKU: CIS40545