Intermec BarPen Wand Barcode Scanner

BarPen^TM 1280 Series Wands

The Intermec BarPen^TM 1280 Series scanners are economical input devices for a wide variety of applications. They are both lightweight and durable, making them a valuable choice for your operation. The long-lasting synthetic sapphire tip of the 1280 Series is housed in a rugged stainless steel barrel that stands up to daily grime and abuse. Choose from a selection of visible light wands to meet your specific needs.

FEATURES

• Lightweight design
• Visible light wands
• Reads over laminate bar codes
• Replaceable sapphire tip
• Stainless steel body resists liquids, dust and dirt

ECONOMICAL OPERATION

The 1280 Series is an economical choice, delivering years of uninterrupted use no matter what the environmental conditions of your operation. Replacement tips are available to extend the life of your scanner.

FUNCTIONAL FORM

GENERAL Visible light wand Most economical bar code input device

Length: 19.1cm (7.5”) Diameter: 1.3cm (0.5”) Weight: 100g (3.53 oz) with standard 8’ coiled cable

Supply: Oerating Current: 35mA nominal at 4.5-5.5V:1280 16 mA nominal at 4.3-6.0V: 1281, 1282, 1283 & 1286

Optical System: 1280, 1281, 1282: 660nm; 1283: 880nm

Scan rate: 1280/1286: 5 to 76cm (2 to 29”) per second at 5 mils 1281-1283: 5 to 127cm (2 to 50”) per second at 10 mils and up

Depth of field:

1280/1286: .25 to 1.0mm (0 to 0.040”) at 5 mils 1281-1283: 0 to 1.6mm (0 to 0.065”) at 7.0 mils and up

Scan angles:

1280/1286: 10° to 30° 1281-1283: 0° to 35°

1280:

Visible Light Source Bar code Density - 5 to 7 mils All Printing

1281:

Visible Light Source Bar code Density - 7 to 12 mils All Printing

1282:

Visible Light Source Bar code Density - 12 to 40 mils All Printing

1283:

Bar code Density - 7 to 12 mils Carbon Inks

1286:

Bar code Density - 5 to 7 mils All Printing / bar code with over laminate Upper read range can be extended to 30 mils if grade “A” print quality

Cables

069444-001 For 944X and 95XX (RJ-11, 6-Pin), 8’ (244cm) Cable 069444-002 For J2010, T24XX and 97XX (10-Pin Mod), 8’ (244cm) Cable 069444-005 For 9730 Port 4 (9-Pin Squeeze), 8’ (244cm) Cable 069444-006 For 9730 Port 1, MaxiBar, MagScan, MaxiScan 2200 w/ Wand Input (RJ11, 6-Pin), 8’ (244cm) Cable 069444-021 For 944X and 95XX (RJ-11, 6-Pin), 20’ (610cm) Cable 069444-022 For J2010, T24XX and 97XX (10-Pin Mod), 20’ (610cm) Cable

Replacement Tip

062441: Replacement tip for all models

Operating Temperature: - 23° to 50°C (-10° to 122°F) Storage Temperature: - 40° to 70°C (-40° to 158°F) Humidity: Non-condensing (0 to 95% )

FCC Part 15 ICES-003 class B EN 55022 CISPR 22

Some approvals and features may vary by country and may change without notice. Please check with your local Intermec sales office for further information.