Zebra 8000D Lab Labels

• Direct thermal, bright white, uncoated receipt paper with a 3.2 mil caliper and high-tack permanent acrylic adhesive for minimal durability applications.
• Designed for use in mobile printers, and typically utilized for temporary labels. Recommended specifically for QLn Series and ZQ500 Series printers.

Ensure that all products are pre-tested to verify they meet the necessary requirements of your specific applications. For more details, visit www.zebra.com/supplies. Product Performance and Suitability: The details contained in this document are provided for guidance and are not intended to set specifications. All purchasers should independently confirm that the product meets the criteria of their distinctive application. NA and Corporate Headquarters | +1 800 423 0442 | [email protected] ©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the Zebra head logo are trademarks of ZIH Corp, registered in various jurisdictions worldwide. All other trademarks are owned by their respective proprietors.

PRODUCT BUILD

Component Description Caliper Facestock White, uncoated paper 3.2 mil Adhesive All-temp, high-tack, acrylic 0.7 mil Liner 40 lb. SCK 3.2 mil TOTAL ± 10% 6.4 mil

TEMPERATURE CONDITIONS

Minimum Application Temperature Service Temperature Optimal Storage Conditions 32° F (0° C) -75° F to 120° F (-59° C to 49° C) 72° F (22° C) at 50% RH Expected Exterior Life Not recommended for outdoor usage

CHEMICAL RESISTANCE

Chemical Weak Blood Body Fluid Salt Water Water Window Cleaner Moderate Alcohol NR Ammonia NR Bleach NR IPA NR Harsh Gasoline NR Grease NR Oil NR Extreme Acetone NR IR Reflow NR MEK NR TCE NR Xylene NR

SUGGESTED USE CASES

• Labeling of curved surfaces, such as: Test tubes, Vials, Syringes